4.3 Cu. Ft. 24" Small Space Ventless Dryer

• Install almost anywhere with Our Most Space-Saving Front Load Pair Available. The ventless design and compact 24" width of the dryer make it easy to fit laundry into tight quarters.

• Save energy and help reduce utility costs with our Energy-Efficient Small Space Dryer Technology. The ventless design with condensing technology recycles air and captures moisture inside the unit instead of using an outside exhaust vent, so you can dry clothes more efficiently.

• Dry a small load of cotton items in under an hour with increased temperatures, so clothes are ready when you’re on a tight schedule.

• Help keep wrinkles from setting into clean, dry fabrics with the Wrinkle Shield™ Option. It keeps clothes tumbling for up to 2-1/2 hours after the cycle ends or until you open the door.

• Help release wrinkles from clean, dry clothes so they’re ready to wear without needing to be rewashed. Simply add a wet towel or clothing item to a small load before running the cycle.

• Baffles help clothes tumble freely instead of getting stuck against the drum, providing a thorough dry for both small and large loads.

• Help protect dryable wool fabrics from damage with the Wool Cycle that evaporates water faster, reducing drying time.

• Thoroughly dry blankets and bedding with the Bulky Items Cycle.

• At 4.3 cu. ft., this compact small space dryer has the capacity to fit your clothes while still being able to fit your living space.

• Reduced temperatures provide the right dry for delicate loads.

• ENERGY STAR® Certified models exceed government standards to help save money on your utility bills.

• Cycle Guide

• Dimension Guide

• Instruction Sheet

• Owners Manual

• Quick Reference Sheet

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.