MRV-5 460V 6-Ton VRF Heat Pump System

Flexible Capacity Options Available

• MRV-5 Heat Pump Models available in 6 through 36 tons with 230V and 460V options

High Efficiency Performance

• Optimized, intelligent control with all DC inverter EVI compressor technology achieves high efficiency performance with high reliability

Variable Temperature Operation

• Wide range of operation from -13°F (-25°C) to 122°F (50°C)

High Performance

• IEER performance up to 25.0

COP Performance

• COP performance up to 3.6

Heating Capacity

• Delivers 80% of rated heating capacity at 5°F (-15°C)

Four-sided heat exchanger

• Four-sided heat exchanger reduces chassis footprint

Black Fin Anti-Corrosion

• Factory standard black fin anti-corrosion coating

Low Nighttime Noise

• Nighttime quiet operation reduces sound levels by 10dB(A)

Auto Oil Balancing

• Automatic oil balancing eliminates the need for oil balancing piping

• See Technical Literature for Full Product Specifications

CAPACITY
Cooling BTUH (MAX)	69000 Btu

FEATURES
Style	Outdoor Heat Pump
Product Type	Commercial
Heating Capacity (BTU/hr)	77000
Unit Type	Outdoor

POWER / RATINGS
Electrical Requirements	460V

WARRANTY
Parts Warranty	See Installation Instructions for full warranty information

WEIGHTS & DIMENSIONS
Net Weight	597 lb
Overall Depth	29.5 in
Overall Width	38.5625 in
Overall Height	66.5625 in
Approximate Shipping Weight	631 lb

• Installation Instructions

• Sales Guide

• Submittal Sheet

 

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

 

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

 

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.