Arctic Series 208-230V 3 Zones 24,000 BTU Multi-Zone Ductless Mini-Split Outdoor Heat Pump System

High Efficiency Ductless Heat Pump

• Non-Ducted SEER of 18.5 and HSPF of 10.5

A-PAM DC Inverter

• Inverter compressor technology designed for high performance and maximum comfort

Blue Fin

• A hydrophilic aluminum fin ensures condensing water flows smoothly

Quiet Operation

• Ductless heat pumps operate quietly for maximum homeowner comfort

Wind Baffle Compatibility for Better Performance

• Compatible with QAWB46A Wind Baffle and UAWB80A Snow Hood

• See specification book for full heating, cooling, and system details

APPEARANCE
Color Appearance	White

FEATURES
Style	Outdoor
Model Type	Outdoor
Maximum Line Length (Ft/M)	196/50
Compatible Indoor Models	Select Haier Multi Zone Indoor Units
Series	Arctic Multi
Maximum Height (Ft/m)	50/15
Rotary Compressor	DC Inverter Driven Rotary
Base Pan Heater	Standard
Temperature Range - Cooling Mode	14-115 F (-10-46 C)
Temperature Range - Heating Mode	-15-75 F (-26-24 C)
Factory Charge (ounces)	99 oz
Maximum Fuse Size A	25
Outdoor Noise Level	56 dBA
Number of Indoor Models	2-3
Connections	Flare
Product Type	Multi Zone
System	24K Arctic Multi Zone

POWER / RATINGS
Cooling Rated Capacity BTU/Hr	22,000
Voltage/Hertz/Phase	208-230/60/1
Minimum Circuit Amp	16

WARRANTY
Parts Warranty	Limited 5-Year Parts and Compressor. 10-Year Limited Parts and Compressor Warranty with Registration. See warranty documentation for complete information.

WEIGHTS & DIMENSIONS
Net Weight	167 lb
Suction O.D. Refrigerant Line	3/8" 3/8" 1/2"
Liquid O.D. Refrigerant Line	1/4" - 1/4" - 1/4"
Overall Depth	13.5 in
Overall Width	37.375 in
Overall Height	33.125 in
Approximate Shipping Weight	205.9 lb

 

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

 

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

 

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.