PTAC + Electric Heat Models
PTAC + Electric Heat Models
Everyday Price
$1,149.00
Sale Price
$979.00
Total Savings
$170.00
Available At...
Regional Distribution Warehouse
In Stock
Color
Features
- Electric Heat
- Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability.
- Additional heating element bottom plate above an improved heat shield provides extra thermal protection.
- Additional thermistor on the blower scroll outlet regulates internal temperature.
- Factory run-tested units reduce problems in the field.
- Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics.
- Easy access filters simplify maintenance and extend the life of the product.
- Room freeze protection initiates heat if temperature falls to 40?F in an unoccupied room.
- Random compressor restart protects electrical systems from overload when power is restored.
- Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation.
- Break-proof control door design maintains the integrity of the unit.
- Indoor coil frost sensor protects the compressor to lengthen the life of the unit.
- Diamonblue Technology protects the outdoor coil from harsh environments..Industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty.
- Nationwide service network and U.S. based Friedrich expert technical team ensures you get fast, knowledgeable service..Super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6.
- Exceptional FriedrichLink energy management thermostats available (wired & wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability.
- Advanced coil design adds more surface area leading to higher efficiencies.
- Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss.
- Energy efficient heat pump models available in our complete line.
- Electronic defrost control ensures more run time in efficient heat pump mode.
- Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage.
- Slinger ring technology in condensate removal system cools the coil and increases efficiency.
- Desk control ready to allow hotel owners to control units from a central location..Dehumidification removes up to 3.2 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth.
- Constant Fan mode provides continuous fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off.
- Fresh air damper brings in fresh outside air when desired.
- Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner.
- Anti-microbial air filters are easy to access and washable.
- Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort.
- Even-heat monitoring checks room temperature and automatically adds heat boost if necessary.
- Automatic periodic sampling of room temperature to ensure desired conditions are maintained.
- Reversible indoor air louvers to easily change direction of airflow..Modular product design ensures easy access to key components for cleaning and repairs; including washable, lift-out air filters.
- Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat.
- Standard heat output power cord comes attached to the unit.
- Compact front is designed to preserve indoor floor space with a depth of 7? inches.
- Faultless Sure-hold front cover system securely attaches the front each time.
- Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall.
- Unit may be installed flush with the floor.
Product Description
Our most efficient and reliable PTAC yet.Engineered for quieter performance, the Friedrich PTAC features a tangential blower wheel, universal heater options, and modular component design for easier service. Hotels focused on maximizing room revenues and minimizing guest complaints buy Friedrich PTAC: Curved coil design of the SG series maximizes the internal surface area to deliver higher efficienciesStainless steel endplates on the coils for better corrosion resistanceGalvanized, zinc-coated steel wall sleevesTangential fan provides quiet, yet powerful airflow that quickly reaches all corners of the roomTwo motor design for quieter indoor sound levelsThick insulation on the inner walls reduce sound transfer into the roomConstant Fan mode produces a steady stream of white noise in both cooling and heating modesIndustry-leading 2-year parts and labor and 5-year limited warranty.
Specification
| Additional Performance Specs | |
| Front Cover Height | 16 |
| Front Cover Width | 42 |
| Front Cover Depth | 7 3/4 |
| Cut-Out Height | 16 1/4 |
| Cut-Out Width | 42 1/4 |
| Dimensions With Package | 21 1/2 |
| Net Weight | 106 lbs |
| Shipping Weight | 126 lbs |
| Air Circulation | 300 CFM |
| COP | n/a |
| Moisture Removal | 1.7 pints per hour |
| Indoor CFM High | 345 |
| Indoor CFM Low | 315 |
| Sensible Heat Ratio | 0.86 |
| Vent CFM | 75 |
| R-410A Charge | 23 oz |
| Suggested Retail Price | Please contact the Friedrich Contract Sales Department at (800) 541-6645 |
| Cooling Btu/hr | |
| Cooling Btu/hr | 7200/7000 |
| Detailed Electrical Information | |
| Voltage | 230/208 |
| Volt Range | 253-187 |
| Cooling Amps | 2.7/2.9 |
| Cooling Watts | 550/535 |
| Reverse Heating Amps | 15.0/13.6 |
| Detailed Electrical Information | 10.7/9.7 |
| Reverse Heating Watts | 3450/2450 |
| Compressor LRA | 13 |
| Compressor RLA | 2.5 |
| Outdoor Fan Motor | HP |
| Plug Face (NEMA #) | |
| Power Cord Length | |
| EER | |
| EER | 13.0/13.0 |
| Reverse Heating Btu/hr | |
| Reverse Heating Btu/hr | n/a |
| Unit Dimensions | |
| Height | 16 |
| Width | 42 |
| Depth | 13 3/4 |
| Volts Rated | |
| Volts Rated | 230/208V |
Documentation
From the Manufacturer
Delivery
Marc’s Appliances Role
Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.
Customer role
We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.
Issues with your appliance or delivery
Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.
Disclosures
Proposition 65 Warning for California ResidentsFeatures
- Electric Heat
- Galvanized zinc coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder coated with a polyester finish and cured in an oven for exceptional durability.
- Additional heating element bottom plate above an improved heat shield provides extra thermal protection.
- Additional thermistor on the blower scroll outlet regulates internal temperature.
- Factory run-tested units reduce problems in the field.
- Internal diagnostic program can alert maintenance to component failures or operating problems. Fourteen numeric service error codes stored in memory facilitate rapid unit diagnostics.
- Easy access filters simplify maintenance and extend the life of the product.
- Room freeze protection initiates heat if temperature falls to 40?F in an unoccupied room.
- Random compressor restart protects electrical systems from overload when power is restored.
- Tamper-resistant, anodized stamped aluminum grille withstands chalking and oxidation.
- Break-proof control door design maintains the integrity of the unit.
- Indoor coil frost sensor protects the compressor to lengthen the life of the unit.
- Diamonblue Technology protects the outdoor coil from harsh environments..Industry leading warranty features 2-year full warranty on parts and labor and 5-year limited warranty.
- Nationwide service network and U.S. based Friedrich expert technical team ensures you get fast, knowledgeable service..Super-efficient refrigeration design with EERs up to 13.0 and COP up to 3.6.
- Exceptional FriedrichLink energy management thermostats available (wired & wireless) with integrated occupancy sensor, five distinct energy presets and comprehensive remote management capability.
- Advanced coil design adds more surface area leading to higher efficiencies.
- Thicker steel inner-wall and foam construction decreases thermal transfer and energy loss.
- Energy efficient heat pump models available in our complete line.
- Electronic defrost control ensures more run time in efficient heat pump mode.
- Electronic temperature limiting to adjust low/high temperature range limits for reduced energy usage.
- Slinger ring technology in condensate removal system cools the coil and increases efficiency.
- Desk control ready to allow hotel owners to control units from a central location..Dehumidification removes up to 3.2 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth.
- Constant Fan mode provides continuous fan operation in cooling or heating modes to create a steady stream of white noise that masks sound level changes when the compressor cycles on/off.
- Fresh air damper brings in fresh outside air when desired.
- Intuitive unit controls are user friendly with easy-to-read LED display that can show either set-point or actual room temperature as selected by owner.
- Anti-microbial air filters are easy to access and washable.
- Instant Heat on heat pump models quickly heats a room to the desired temperature for increased comfort.
- Even-heat monitoring checks room temperature and automatically adds heat boost if necessary.
- Automatic periodic sampling of room temperature to ensure desired conditions are maintained.
- Reversible indoor air louvers to easily change direction of airflow..Modular product design ensures easy access to key components for cleaning and repairs; including washable, lift-out air filters.
- Remote thermostat pop-out wiring module allows easier wiring and unit change out without rewiring thermostat.
- Standard heat output power cord comes attached to the unit.
- Compact front is designed to preserve indoor floor space with a depth of 7? inches.
- Faultless Sure-hold front cover system securely attaches the front each time.
- Inner wall service plate provides service access to tangential blower bearing without having to open up the entire inner wall.
- Unit may be installed flush with the floor.