Maestro Series 30" Single Wall Oven

Dual 10 pass BAKE heating Element (under glass)

• 3100 W

Dual Ribbon BROIL Element (under glass)

• 3500 W

Hidden Convection Element

• 2800 W

Modes

• BAKE, DELICATE BAKE, BROIL, ROAST, PERFECT CONVECTION, PROBE, SELF CLEAN plus, CONVECTION and MOIST..Dual air-flow convection

• Large 4.5 cu. ft. oven cavity - 25 1/8" W X 16 1/2" H X 18-7/8" D

• Moist Cooking

• Moto-Rotis

• Meat Probe

• Clock - Dual kitchen timers

• Timed and Delay Cook feature

• Hidden bake element under glass for easy clean up and efficient oven heating

• Ribbon Broil element under glass results in BBQ quality searing

• Flex-Roll oven racks for smooth operation*

• Titanium speck porcelain oven interior*

• 6 rack positions w/ 3 racks provided

• Broil pan provided

• 1" thick professional-style handle

• Heavy-duty oven door hinges

• Extra large viewing window

• Bright oven lights

• Sabbath Mode

General
Size	30
Oven Fuel	Electric
Utility Type	All Electric
Electrical Rating	Voltage: 240 VAC, 60Hz
Max. Current	21.3 AMP Breaker Size: 30 AMP
Shipping Weight	275 lbs
Product Weight	235 lbs
Shipping Dimensions	34 W x 36 H x 34 D
Product Dimensions	29-7/8 W x 28-9/16 H x 25 D
Max Current/Circuit Breaker Rating	Voltage: 240 VAC/60 Hz Max. Current: 21.3 AMP Breaker Size: 30 AMP
Wiring Type	Permanently connected 4 wires (L1, L2, Neutral, Ground)
Primary Oven Dimensions	25-1/8 W x 16-7/16 x H 18-7/4 D
Primary Oven Volume	Usable: 4.15 cu. ft.
Overall	4.5 cu.ft.
Oven Control Type	Digital
Cutout Dimension	28-1/4 H x 28-1/2 W x 23-3/4 D

• Spec Sheet

• Installation Guide

 

Marc’s Appliances Role

Within 24 hours of your delivery date, you will be notified with a 3 hour delivery time frame. Delivery times are approximate only. Marc’s Appliances can not guarantee a specific time. Should you require a redelivery, if delivery was not complete due to the appliance not fitting, water hoses frozen, or a water shut off valve frozen an added charge may apply. Standard delivery refers to first and second floor deliveries with appropriate access. Removal of existing units on a one for one basis. Marc’s Appliances will install electric appliances to existing fittings. Installation refers to washers, dryers, and electric freestanding ranges. Installation of the Anti-tip device is available at an additional charge. Be aware it is a fire hazard to install dryer vents to plastic ducts and Marc’s Appliances personnel will not install. Marc’s Appliances will not remove any old appliance laden with grease, oil or pests of any type. Marcs Appliances will relocate your old appliances within the home for an additional charge.

 

Customer role

We require a 24 hours notice of any changes to your address, phone number, sales order or to reschedule delivery. Measure all doors, hallways, staircases and location that the appliance will be installed to assure that your appliances will fit. Our delivery team cannot alter or exchange doors, door trims, or moldings. To protect your property and our delivery personnel, we require safe access into your home. Please make sure that all paths and walkways are clear of snow, ice and debris. Problems or damage to your property caused by our delivery team must be reported to our delivery drivers at the time of delivery. Any delivery deemed unsafe to your property or our delivery team may not be performed and will require remediation prior to re-delivery. Securing a Rebate, if applicable for your purchase, is the customer's responsibility. Marc’s Appliances does not offer Manufacturers Rebates. Marc’s Appliances will strive to assist the customer by providing rebate forms, serial numbers and invoice copies if needed.

 

Issues with your appliance or delivery

Any cosmetic issues or damage to the appliances must be reported to the delivery team at the time of delivery. If you have any installation issues within the first 7 days please contact the store and we will have the delivery team or installation person come back out to make the installation correction. During your Manufacturer warranty period or extended warranty please contact the manufacturer directly to set up service during the manufacturer warranty period. All service requests MUST be set up thru the manufacturer or extended warranty company.